Auto Surround; Seat Position - JVC EXAD KD-AV7000 Instructions Manual

AUTO SURROUND
You can activate an appropriate surlound mode
automatically when a loaded disc is detected.
o FRONT LEFT: For the fl'outleft seat.
. FRONTRIGHT: For the front right seat.
o ALL CENTER: For all front and *'earseats.
o REAR CENTER: For the rear seats.
o ON:
An appropriate surrou_d/DSP mode is
automatically selected.
While Dol/_gital multi-cbam_el
signals arc detected, "Dolby Digital" is
automatically selected.
While DTS multi-chanuel sigj_aJs are
detected, "DTS" is automatically
selected.
While Dolby Surf(mud (PL ll) sig*mls
are detected "Dolby Pro Logic I1
Movie" is automatically selected.
While Linear PCM signals are detected
dbr DVD/CD),' Dolby Pro Logic ll
Music" is automatically selected.
While other signals are detected,
Surrouud mode is defeated.
o
OFF:
Cancels
this
flmction.
Auto Surround does not worlc,fbr a*l.),,sources
other than "DLS"C/' When another source i,_
selects'd, the c'ur_ndy selected Surround or DSP
mode is resumed (see p_lge 37).
. , .......................: Displays the SPK
DISTANCE screen.
You can adjust the speaker distance from
your listening position in meters or lcet.
. I _p_ k_'_/_k : Displays the SPK
LEVEL screen.
You can adjust the speaker level referring to
the test tone.
SEAT POSITION
Select the listening seat position where you
want to locate the sound image.
Speaker distance and speaker level can be
memorized for each position,
1
Display sub-setting screens.
Emits the test tone from each
speaker in sequence.
To stop, press again.