Jenn-Air JMW2427WB00 Use & Care Manual page 7

Menu Demond s s {ion
The following demonstrates a sequence showing how to cook
from the Main Menu using a timed bake cycle.
This manual covers different models. The locations and
appearances of the features shown may not match those of your
model.
1. Touch the START button or the OVEN button.
2. From the Select Mode menu, touch the quickset pad next to
BAKE.
m
m
Select mode:
Bake Auto Convection
Conversion
Broil Multimode
Convection
1of3
lq i stort I Fq
E]
E]
3. From the Temperature menu, use the number keypad to enter
desired cooking temperature.
Bake Temperature Cook Timer
Set Cook Timer F_
R I startI
4=
Press SET COOK TIMER. Enter cooking time using the
number keypad to set a timer to alert you when cooking
ends. If Cook Timer is set prior to heating the oven, the timer
will begin counting down automatically after the door is
opened and then closed. Or, you may touch the quickset pad
next to Start Timer.
If the Cook Timer is set after the oven begins heating, the
timer will start immediately after pressing Start.
D
Bake 350 Cook Timer"
00:00:00
HR: MIN: SEC
Keep
Warm when done: Off Delay Start
Fqlst°rtl
D
5. If desired, the Keep Warm and Delay Start options can be
programmed from the Cook Timer screen. See the "Keep
Warm" and "Delay Start" sections for additional information.
6. Press START to begin preheating oven.
7. Place food in oven when the preheat signal sounds. The
screen will also prompt you when to insert food.
8. Press CANCEL OVEN (CANCEL UPPER or CANCEL LOWER,
on double models) to turn off the oven.
Your oven provides you with the ability to control several of the
default settings and access information through the on screen
display. These include: Clock, Sound, Screen Appearance,
Language, Temp Units, Service Info, Sabbath Mode, Oven
Calibration and Restore Defaults.
To Access Setup Menu:
1. Press START or Oven.
2. From the Select Mode menu, press the MORE button until
you see the Setup Menu choice.
3. Touch the quickset pad next to the Setup Menu choice.
Clock
This clock can be used in 12-hour or 24-hour format.
At any time desired, press BACK to return to the Setup Menu.
1. From the Setup menu, touch the quickset pad next to Clock.
2. From the Clock menu, touch the quickset pad next to Time.
3. Enter current time (--:--). Choose AM or PM.
4. Select SAVE. This will return you to the Clock settings menu.
5. From the Clock menu, touch the quickset pad next to DATE.
6. Enter current date (MM/DD/YYYY). Select ON or OFF for
Daylight Savings Adjust.
7. Select SAVE. This will return you to the Clock settings menu.
8. From the Clock menu, touch the quickset pad next to Format.
9. Select time format: AM/PM or 24 hour (Military Time).
10. Select SAVE. This will return you to the clock display screen.
11. From the Setup Menu, touch the quickset pad next to Clock.
12. From the Clock menu, touch the quickset pad next to Clock
Style.
13. Select clock style on idle screen: Analog or Digital.
14. Select SAVE. This will return you to the clock display screen.
Sound
1. From the Setup menu, touch the quickset pad next to Sound.
2. From the Sound menu, touch the quickset pad next to Timer
Volume.
3. Adjust the Timer Volume by touching the left quickset pad to
decrease the volume, or the right quickset pad to increase
the volume. To turn Timer Volume off, touch the left quickset
pad until Off is reached.
4. Select SAVE. This will return you to the Sound settings menu.
5. From the Sound menu, touch the quickset pad next to Button
Volume.
6. Adjust Button volume by touching the left quickset pad to
decrease the volume and the right quickset pad to increase
the volume. To turn Button Volume off, touch the left quickset
pad until Off is reached.
7. Select SAVE. This will return you to the Sound menu.
8. From the Sound menu, select ON or OFF on Startup/
Shutdown Sounds.
9. Press BACK to return to the Setup menu.