Assembly - LIFESTYLER 831.297242 Owner's Manual

ASSEMBLY
Set the trea_lmillin a cleared area and remove all packing materials. Do not dispose of the packing materials until
assembly is completed.THE FOLLOWING TOOLS ARE REQUIRED FOR ASSEMBLY: The Included 7/32"
allen wrench _i_ |i_ and your own adjustable wrench _-----"_ .
1,
With the help of a second person, raise the Right Upright (27)
and Left Upright (not shown) to a vertical position.Align the
hole in the lower end of the Right Upright with the hole in the
side of the Frame (50). Insert a 3/8" x 3" Bolt (3!), with an
UprightWasher (30), into the Right Upright and tighten the Bolt
into the Frame. Tighten the Bolt that Is already in the Right
Upright.
27
Attach a Bolt and Washer on the left side in the same manner
(not shown).
30 31
.
With the help of a second person, raise the Left and Right
Handrails (1, 11) as shown. Insert two 3/8" x I 1/4" Bolts (13)
into the Left and Right Uprights (19, 27) and tighten the Bolts
with the 7/32" Allen Wrench (90).
11
0o
3. Remove the paper backing from the Wrench Clip (21). Press
the Wrench Clip onto the Frame (50) in the indicated location.
Press the 3/16 _ Allen Wrench (72) into the Wrench Clip.
Make sure that all parts are tightened before using the treadmill.
Note: To protect the floor, a covering should be placed under
the treadmill
_"" 50
21 ,_72
6