LIFESTYLER 831.297033 Owner's Manual page 7

PLUGGING THE POWER CORD IN
This product must be grounded. If it should malfunction or break down, grounding provides a path
of least resistance for electric current to reduce the risk of electric shock. This product is equipped with
a cord having an equipment-grounding conductor and a grounding plug. Plug the power cord into an
appropriate outlet that Is properly Installed and grounded In accordance with all local codes
and ordinances.
A;k DANGER:
Improper connection of the equipment-grounding conductor can result in a risk
of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the
product is properly grounded. Do not modify the plug provided with the product--if it will not fit the
outlet, have a proper outlet installed by a qualified electrician.
This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug
illustrated in Drawing 1.
A temporary adapter that looks like the adapter illustrated in Drawing 2 may be used to connect this
plug to a 2-pole receptacle as shown in Drawing 2 if a properly grounded outlet is not available. The
temporary adapter should be used only until a properly grounded outlet (Drawing 1) can be installed by
a qualified electrician. The green colored rigid ear, lug, or the like extending from the adapter must be
connected to a permanent ground such as a properly grounded outlet box cover. Whenever the
adapter is used it must be held in place by a metal screw.
Some 2-pole receptacle outlet box covers are not grounded. Contact a qualified electrlclan to
determine if the outlet box cover Is grounded before using an adapter.
2
Grounded Outlet Box
Grounding Plug
Grounding Pin
"Grounded Outlet
Lug
Metal Screw
Grounded Outlet Box
Adapter
,Grounding Pin
Grounding Plug
INCLINE ADJUSTMENT
To vary the intensity of your exercise, the incline of the
treadmill can be adjusted, using the lever on the right side
of the console. Do not adjust the Incline while you are
walking or running on the treadmill. To increase the
incline, stand toward the back of the foot rails and pull
back the lever. When the desired incline is reached,
release the lever. To decrease the incline, stand toward
the front of the foot rails, lean forward if necessary, and
pull back the lever until the desired incline is reached.