Husqvarna Z4824 Operator's Manual page 30

OPERATION
8.
Press in and turn the ignition key to the
start position.
801_.742
Turnto thestartposition
9.
When the engine starts, immediately
release the ignition key back to the run
position.
IMPORTANT INFORMATION
Do not run the starter for more than
5 seconds each time. if the engine does
not start, wait about 10 seconds before
re-trying.
aO11-743
Return torunposition
10. Set the desired engine speed with the
throttle.
Allow the engine to run at a moderate
speed, "half throttle",for 3-5 minutes before
loading it too heavily.
USE FULL THROTTLE WHEN MOWING
(no choke).
WARNING!
Engine exhaust and certain
vehicle components contain or
emit chemicals considered to
cause cancer, birth defects, or
other reproductive system
damage. The engine exhaust
contains carbon monoxide,
which is an odorless,
colorless, poisonous gas. Do
not use the machine in
enclosed spaces.
Set the engine speed
8011754
English-27