Table of Contents
Advertisement
1.
Remove the main filter (outer filter) by pulling it out
by hand.
2.
Check the inner filter. If it appears dirty, it should
be replaced. Remove the inner filter, if necessary,
by pulling it out by hand.
3.
Clean inside of the filter housing. Wipe dry only.
4.
Install the inner filter with the open end first.
Ensure that it enters its recess at the end of the
housing by pushing it in to the stop.
5.
Install the main filter with the open end first.
Ensure that it enters its recess at the end of the
housing by pushing it in to the stop.
6.
Replace the end cap and turn the end cover so the
rubber valve is pointing downwards. Secure the
retaining clips.
Replacing the Fuel Filter
Replace the line-mounted fuel filter every 100 hours
(once per season) or more regularly if it is clogged.
To replace the filter:
1.
Move the hose clamps away from the filter. Use
flat-nosed pliers.
2.
Pull the filter loose from the hose ends.
3.
Push the new filter into the hose ends. Position the
filter with the "FLOW" arrow pointing up toward the
fuel pump. If necessary, a soap solution can be
applied to the filter ends to ease mounting.
4.
Move the hose clamps back toward the filter.
mAINTENANCE
Installing the main filter
Installing the inner filter
Check and clean the cooling air intake
8011-449
8011-450
8011-783
Husqvarna-33
Advertisement
Table of Contents
