Ignitionswitch; Choke Control; Choke Control; Throttle Control - Husqvarna Z4824 Operator's Manual

CONTROLS
7. Ignition Switch
The ignitionkey is placed on the driver's
panel and is used to start and stop the
engine.
IMPORTANT INFORMATION
Do not run the starter for more than five
seconds each time. If the engine does not
start, wait about 10 seconds before re-
trying.
Ignition key and hour meter
11011.748
8. Choke Control
The choke mode is used for coldstartsin order
to providethe enginewith a richerfuel mixture.
The Throttle controlis equipped with a choke
detent. Pressing the throttle control all of the
way forward will choke the engine. For full
throttle, press throttle controlforward until
you feel the choke detent.
Choke control detent
8011480
9. Throttle Control
The throttle controlregulates the engine
speed and thereby the rate of rotation of the
blades, assuming the blade switch is pulled
out, see Engaging the Mower Deck.
In order to increase or decrease the engine
speed, the controlis moved.
Avoid idling the engine for long periods, as
there is a risk of fouling the spark plug.
USE FULL THROTTLE WHEN MOWING, for
best mower performance and battery
charging.
Throttle control
8011 747
English-21