Maintenance; Maintenance Schedule - Husqvarna Z4824 Operator's Manual

MAINTENANCE
Maintenance
Maintenance Schedule
The following is a list of maintenance procedures that must be performed on the machine. For those points
not described in this manual, visit an authorized service workshop. An annual service carried out by an
authorized service workshop is recommended to maintain your machine in the best possible condition and
to ensure safe operation.
Read =Maintenance" in the Safety Instructionssection.
• = Described in this manual
C) = Not described in this manual
Maintenance
Check the parking brake
_,heckthe engine's oil level (every refueling)
Check outside of air cleaner
Check the safety system
Check for fuel and oil leakages
Check/clean the engine's cooling air intake
Check the mower deck
Check hardware (screws, nuts, etc.)
Clean under the mower deck
Start the engine and blades, listen for unusual
sounds
Check for damage
Thoroughly clean around the engine
Clean around belts, belt pulleys, etc.
Daily Weekly At Maintenanceinterval
mainte- mainte- least in hours
nance nance once
Page Before After each 25 50 100 300
year
41 •
54 •
39 •
38 •
O
39 •
46 •
50 •
50 •
O
O
O
O
Check the tire pressures
Check battery
Sharpen/Replace mower blades
Lubdcate the caster wheels
41
36
45
5O
Clean the engine's cooling air intake 2)
Clean the air cleaner's pre-filter 2) (foam)
Clean the air cleaner's filter cartridge 2)
(paper filter)
Check/adjust the parking brake
Inspect muffler/Spark attester
39
40
40
• •
0 0
0 0
English-34