Horizon Fitness RST5.6 Assembly & User's Manual page 5

I
me
I RST5.6 Rev.l.4.indd 8-9
Disassembleboxand removethe cardboardpackaging that is not beneaththe treadmill. Do not attempt to
lift the treadmill at this time. Removeplastic wrap from consolemasts.
*NOTE: During each assemblystep, ensure that ALL nuts and bolts are in place and partially threaded in
beforecompletely tightening any ONEbolt. NOTE: A light application of grease may aid in the installation of
hardware.Anygrease,such as lithium bikegreaseis recommended.
__ BOLT (A)
55 rnrn
Qty: 4
FLAT WASHER (B)
Qty:4
LEAD WIRE RIGHTCONSOLE MAST CONSOLE C ABLE
A) OpenHARDWARE B AG I.
B) Pull LEADWIREthroughRIGHT
CONSOLE MAST to drag upward.
c)
PlaceRIGHT CONSOLE MAST
into upright position using 2
DOLTS (A)and 2 FLAT WASHERS
(B), then tighten. Be sureto
hold the CONSOLE MAST firmly,
as it will not stay in the upright
positionon its own.
*NOTE: D onot pinch CONSOLE
CABLE whenplacing the mast
onto the main frame.
CONSOLE M AST
FLAT WASHERS (B)
BOLT ( A)
D)
Repeaton the left side.
*NOTE: T hereis no wirein the
LEFTCONSOLE MAST.
NOTE: T hereis nohardwarebagfor this step.
A) Lift the RUNNING DECKuntil LOCK LATCH onside of treadmill is fully engaged.
B) Remove CONSOLE from boxand place out of the way.
C) Lowerthe treadmill RUNNING DECK from the foldedposition by steppingon LOCK LATCH
on the bottomleft side of the deck.
SCHEW (C)
12rnrn
Qty: 2
A)
D)
OpenHARDWARE BAG3.
Slideleft ROLLER ENDCAPonto
MAINFRAME and attach with
SCREW ( C).
_ ROLLER ENDCAP
C) Repeaton otherside.
7/17/06 4:59:25 PM I