Download Print this page

GE JMS08 Use And Care Manual page 7

Hide thumbs Also See for JMS08:

Advertisement

Available languages

Available languages

HOW
DOES THIS COOKTOP
COMPARE
TO YOUR OLD ONE?
Your new cooktop has electric coil surface units.
If you are used to cooking with gas burners or other
types of electric cooktops,
you will notice some
differences
when you use electric coils.
The best types of cookware
to use, plus heat-up and
cool-down
times, depend upon the type of burner or
surface unit you have.
The following
chart will help you to understand
the
differences
between
electric coil surface units and any
other type of cooktop you may have used in the past.
Type of Cooktop
Electric Coil
@
Radiant
(Glass
Ceramic)
Cooktop
O
Induction
\\\\u
rlt///
Solid Disk
Gas Burners
Description
Flattened metal
tubing containing
electric resistance
wire suspended
over a drip pan.
Electric coils
under a glass-
ceramic cooktop.
High frequency
induction coils
under a glass
surface.
Solid cast iron
disk sealed to the
cooktop surface.
Regular or sealed
gas burners use
either LP gas
or natural gas.
How it Works
Heats by direct contact with the pan and by heating the air under the pan. For best
cooking results, use good quality pans. Electric coils are more forgiving of
warped pans than radiant or solid disks. Heats up quickly but does not change
heat settings as quickly as gas or induction. Electric coils stay hot enough to
continue cooking for a short time after they are turned off.
Heat travels to the glass surface and then to the cookware, so pans must be fiat on
the bottom for good cooking results. The glass cooktop stays hot enough to
continue cooking after it is turned off. Remove the pan from the surface unit if
you want cooking to stop.
Pans must be made of ferrous metals (metal that attracts a magnet). Heat is
produced by a magnetic circuit between the coil and the pan. Heats up right away
and changes heat settings right away, like a gas cooktop. After turning the control
off, the glass cooktop is hot from the heat of the pan, but cooking stops right away.
Heats by direct contact with the pan, so pans must be fiat on the bottom for good
cooking results. Heats up and cools down more slowly than electric coils. The
disk stays hot enough to continue cooking after it is turned off. Remove the pan
from the solid disk if you want the cooking to stop.
Flames heat the pans directly. Pan flamess is not critical to cooking results, but
pans should be well balanced. Gas burners heat the pan right away and change
heat settings right away. When you turn the control off, cooking stops right away.
7
_,,,,Be
r_

Advertisement

loading

This manual is also suitable for:

Jms10