How To Remove The Termination Card; Removing The Termination Card - Intel MS440GX Product Manual

MS440GX Motherboard Product Guide

How to Remove the Termination Card

Procedure To: Remove the Termination Card
Step Action
1 Observe the safety precautions in Safety Considerations at the beginning of this chapter.
2 Turn OFF the computer.
3 Disconnect the computer's power cord and all external peripheral equipment.
4 Remove any peripherals that block access to the processor Slot 2 connector.
5 Remove the two screws holding the DRM Top over the P1 slot Termination Card.
6 Using the DRM top (A) as a handle, lift the Termination Card (B) up and out of the processor Slot
2 connector (C) and the processor retention mechanism (D) as shown by the arrows in the
illustration below.
NOTE
Do not rock the Termination Card out of the connector - pull vertically upward.
46
B
C
D
Figure 10.
A
OM08288