MS440GX Motherboard Product Guide
Regulatory Compliance
This motherboard complies with the following safety and electromagnetic compatibility (EMC)
regulations when correctly installed in a compatible host system.
Table 65.
Safety Regulations
Regulation
UL 1950 - CSA 950-95, 3rd edition,
Dated 07-28-95
IEC 950, 2nd edition, 1991 (with
Amendments 1, 2, 3, and 4)
Table 66.
EMC Regulations
Regulation
FCC Class A
Product Certification Markings
This motherboard has the following product certification markings:
European CE Marking: Consists of a marking on the board and/or shipping container.
UL Recognition Mark: Consists of the UL File No. E186194 and a stylized backward UR on
the component side of the board and the PB No. on the solder side of the board. Board
material flammability is minimum 94V-1 or -0.
Canadian Compliance: Consists of a small c followed by a stylized backward UR on the
component side of the board.
Installation Precautions
When you install and test the motherboard, observe all warnings and cautions in the installation
instructions.
To avoid injury, be careful of:
Sharp pins on connectors
Sharp pins on printed circuit assemblies
Rough edges and sharp corners on the chassis
Hot components (like processors, voltage regulators, and heat sinks)
Damage to wires that could cause a short circuit
Observe all warnings and cautions that instruct you to refer computer servicing to qualified
technical personnel.
122
Title
The Standard for Safety of Information Technology Equipment
including Electrical Business Equipment. (USA and Canada)
The Standard for Safety of Information Technology Equipment
including Electrical Business Equipment. (International)
Title
Title 47 of the Code of Federal Regulations, Parts 2 and 15,
Subpart B, pertaining to unintentional radiators. (USA)