Accelerated Graphics Port (A.g.p.) Support; Memory; Dimm Sizes Supported - Intel MS440GX Product Manual

Accelerated Graphics Port (A.G.P.) Support

The Accelerated Graphics Port (A.G.P.) is a high-performance interconnect for graphic-intensive
applications, such as 3D applications.
A.G.P. is independent of the PCI bus. It is intended for exclusive use with graphical display
devices. A.G.P. provides these performance features:
Pipelined-memory read and write operations that hide memory access latency
Demultiplexing of address and data on the bus for near 100 percent bus efficiency
AC timing for 133 MHz data transfer rates, allowing data throughput of 528 MB/sec
An A.G.P. connector is provided on the motherboard to install A.G.P. add-in cards.

Memory

The motherboard has four dual inline memory module (DIMM) sockets.
Minimum memory size is 32 MB; maximum memory size is 2 GB. The BIOS automatically
detects memory type and size.
The motherboard supports the following memory features:
PC100 compliant 168-pin DIMMs with gold-plated contacts
3.3 V unbuffered or registered (not mixed) 100 MHz ECC SDRAM DIMMs only
Single or double sided DIMMs in the sizes listed in the Table 4.
Table 4.

DIMM Sizes Supported

DIMM Size
16 MB
32 MB
64 MB
128 MB
256 MB
512 MB
Memory can be installed in any order in one, two, three or four sockets.
Memory size can vary between sockets.
Memory speed is 100 MHz only.
Configuration
2 Mbit x 72
4 Mbit x 72
8 Mbit x 72
16 Mbit x 72
32 Mbit x 72
128 Mbit x 72
Motherboard Features
21