Fordos Users (Only Formfc6550Mc/7550Mc); Howtousethemfcwithyour D Os Application; Software - Brother MFC 7550MC Setup Manual

Fax, printer and copier
Hide thumbs Also See for MFC 7550MC:
Table of Contents

Advertisement

SOFIWARESETT1NCS
Helpful Hints
• The installer automatically
updates your SYSTEM.INI Windows@
file by adding DEVICE=bi-di.386
under the [386Enh] section. If any
bidirectional
parallel communications
device driver has previously
been installed,
it will be deactivated
by this new driver. If you want
to use the driver that was previously
installed,
you should first
install
this driver, then reinstall
your previous
driver. However,
reinstalling
the previous driver will make the MFC driver inactive.
• The installer
makes
the installed
printer
driver the Windows@
default.
* The installer
automatically
sets the printer
port to the parallel
interface,
LPT1.
• During
this
installation,
changes
have
been
made
to the
SYSTEM,INI
file. It is necessary
to restart
Windows@ so that the
changes become effective and the installed
bidirectional
parallel
communications
device driver can take effect.
2) FOR DOS USERS (Only for MFC 6550MC/7550MC)
How to Use the MFC with Your DOS Application
Software
Before working with your application
software
that runs on DOS or Windows MS-
DOS Prompt, check that the machine's name (MFC) appears
in the printer selection
of your application
software.
If the MFC is not listed, you must install the printer
driver that corresponds
to HP LaserJet
liP's emulations.
The following table shows combinations
of printer drivers and emulation
mode. To get
the most out of this machine,
you should install
an lip
printer
driver
in your
application
software.
Printer driver supported
in
Emulation
mode to be selected with
your application
software
the remote printer
console program
lIP LaserJet
IIP
TM
HP LaserJet
IIP emulation
mode
HP LaserJet
II
TM
Auto emulation
selection
Helpful Hints
• The best or recommended
printer
driver is indicated
in bold.
• Be sure to choose the proper printer
driver in your application
software.
• Be sure the printing
resolution
is set to 309 dpi in your DOS
application
software.
" '"
"
'"'
I" 5
3-

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc 6550mcMfc 4550

Table of Contents