Whatdoes T Heremote Printerconsole Do; Installing Theremote P Rinterconsole - Brother MFC 7550MC Setup Manual

SOFTWARE SEI'TING£
What Does the Remote Printer Console Do?
The Remote Printer Console (RPC) is a utility program that can run in the DOS
environment and comprises the following two programs:
Remote Printer Console Main Program
This program allows you to change various printer settings such as emulation, print
quality, fonts, page setup etc., from your computer screen. Since most DOS applications
have a printer settings menu that overrides the settings made by the RPC, you may
not have to use this utility program. This utility program is useful for application
software that does not control the printer's settings and features.
Printer Status Monitor Program
This utility program can monitor your printer's status using bidirectional parallel
communications. If your MFC has no paper, this utility program displays "Paper
Empty" error status and instructions for corrective action on your computer screen.
This utility program stays resident in your computer memory (Terminate-and-Stay
Resident program) and runs in the background.
Installing the Remote Printer Console
Before you install the program, make sure you have the following hardware and
software to install the program:
DOS Version 3.3 or later
Monitor EGAWGA or compatible
Option Mouse; the mouse driver must be installed.
(You can also operate the program with the keyboard.)
Follow these steps to install the remote printer console program:
l. Make sure your MFC is connected to your computer and it is set to on-line.
2. Start your computer and go to the DOS prompt. If you are in Windows@, exit and
return to the DOS prompt.
3. Insert the supplied disk into your floppy disk drive (A: or B:).
iiiiiiii IIII
3-16