Installing A Mfc, Two Line Tad And Two Line Telephone - Brother MFC 7550MC Setup Manual

_R YOUR INI_ORMATION
Installing a MFC, Two Line TAD and Two Line Telephone
When you are installing a two line telephone answering device (TAD) and
a two line telephone, your MFC must be isolated on one line at both the wall
jack and at the TAD. The most common connection is to put the fax machine
on line 2. The back of the two line TAD must have two telephone jacks: one
labeled L1 or L1 and L2 and the other labeled L2. You will need at least
three telephone line cords: the one that came with your MFC and two for
your two line TAD. You will need a fourth line cord if you add a two line
telephone.
Place the two line TAD and two line telephone beside your MFC. Plug one
end of the telephone line cord for your MFC into the L2 jack of the triplex
adapter; plug the other end into the LINE jack in the back of the MFC. Plug
one end of the first telephone line cord for your TAD into the L1 jack of the
triplex adapter; plug the other end into the L1 or L1 and L2jack in the back
of the two line TAD. Plug one end of the second telephone line cord for your
TAD into the L2 jack in the back of the two line TAD; plug the other end into
the EXTjack in the back of the MFC. The two line TAD hookup is complete.
It will answer both lines as usual.
You can keep two line telephones on other wall outlets as always. There are
two ways to add a two line telephone to the MFC's wall outlet. Plug the
telephone line cord from the two line telephone into the LI+L2 jack of the
triplex adapter. If you prefer, you can plug it into the TELE jack in the back
of the two line TAD instead.
Triplex Adapter
l ? TwoLi.e Phooe
L] L2 L]____2] _LI/L2
L] L2
Two Line TAD Fax Machine
I I
2-12