Brother MFC 7550MC Setup Manual page 40

SOFTWARE SETTINGS
Font Config
Item Default What This Item Does
Font Source Internal*l
Font name Broghaml0
Pitch 10
Symbol Set *2
Selects the font source between "Internal" and
"Permanent."
Selects a font from any of the printer's internal or
permanent downloaded fonts.
Selects the font size of the selected font.
If you selected the Brougham or LetterGothic font,
Pitch is shown in the selection box.
Selects the symbol set.
*1 This setting is valid only when the emulation is set to HP LaserJet IIP.
*2 This setting varies according to the emulation setting.
Printer Config
Item Default What This Item Does
Continue Mode Manual Selects Auto or Manual on Auto error recovery mode.
Parallel High Speed Valid Selects the parallel high speed "Valid" or "Invalid".
Reprint Valid Sets the reprint function "Valid" or "Invalid".
Other Config
Item Default What This Item Does
Auto LF Off
Auto CR Off
Auto Wrap Off
Auto Skip On
Auto Mask Off
Selects Auto LF "On or Off"
Selects Auto CR "On or Off'
Selects Auto Wrap "On or Off'
Selects Auto Skip "On or Off' (Only for HP Emulation)
Selects Auto Mask"On or Off' (Only for IBM an Epson
Emulation)
I II iii I
3-20