Printersetup Category - Brother MFC 7550MC Setup Manual

Printer Setup Category
Print Setup Section
Item Default What This Item Does
Copy Pages 1
Quality Normal
Emulation Laser Jet IIP
Time out 5 sec
Auto FF Off
Auto FF Timeout 5 sec
Sets the number of print copies from 1 to 200 pages.
Selects the print quality to either "Normal" and
"Economy".
Laser Jet IIP
In "Auto" emulation mode, sets a time-out value
of 1 to 99 seconds.
If set to ON, the printer will print the remaining data
automatically without your pressing the FF/CONT
key.
Sets the time-out value for the Auto FF mode
from 1 to 99 seconds.
Page Setup Section
Item Default What This Item Does
Paper size*l Letter
Orientation* 1 Portrait
Left Margin *2
Right Margin *2
Top Margin 0.5" or 0.33"
Bottom Margin 0.5" or 0.33"
Line / Page *2
Selects the paper size from "A4", "Letter", "Legal",
"B5", "DL", "JIS B5", "Executive", "COM10",
"Monarch", or "C5."
Selects the paper direction to either "Portrait" and
"Landscape."
Sets the Left Margin value (0-126) colums
Sets the Right Margin value (0-136) colums
Sets the Top Margin 0", 0.33", 0.5", 1", 1.5" or 2".
Sets the Bottom Margin 0", 0.33", 0.5", 1", 1.5" or 2".
Sets the lines/pages (5-128).
Xoffset
Yoffset
0
0
Sets the Xoffset (vertical) value from -500 to 500 dots.
Sets the Yoffset (horizontal) value from -500 to 500
dots.
"1 These values (except Yoffset and Xoffset) are overidden by settings within your
application software.
*2 These values depend on the emulation/paper size settings.
liD] II IIIII nllllHll I III I II IIIIIIIIIIIII I
3-19