GE Monogram ZEK938 Owner's Manual page 41

getbre You (;all For Service...
I,l?d/ Oven
Save time
& money/
lvoubh, shooliTtg lips
oTt d_@d/owhtg
pa_>_ first aTtd you
may tzot 1wed to
call fbv sevvic<
PROBLEM POSSIBLE CAUSE
CLOCKAND TIMER * A fuse ill wmr home may be blown or the circuit breaker tripped.
DO NOT WORK Replace the fuse or reset the circuit breaker.
• (-)yen controls improperly set. See the Oven Control, Clock a_d Timer
section.
OVEN LIGHT DOES , Light bulb is loose or defective. Tighten or replace the bulb.
NOT WORK * Pad operating light is broken. Call for service.
OVEN * (-)yen themmstat needs ac!justment. See the A_(just the Oven Tlwrmostat
TEMPERATURE, Do it you*:se(/! section.
TOO HOT OR
TOO COLD
OVEN WILL * A fuse in your home may be blown or the circuit breaker tripped.
NOT WORK Replace the fuse or reset the circuit breaker.
•(-)ven controls improperly set.
FOOD DOES NOT
BAKE OR ROAST
PROPERLY
FOOD DOES NOT
BROIL PROPERLY
OVEN WILL NOT
SELF CLF, AN
* Oven controls improperly set. See the Baking" or Roasting" section.
* Rack position is incorrect or the rack is not level.
* Incorrect cookware or cookware of improper size being used.
* Oven thermostat needs a(!justment. See the A@_st the Ove_z Thermostat
Do it yol_*:se(/] section.
* Oven door is open. Close the door. This model is designed %r closed door
broiling only. Always broil with the door closed.
* Oven controls improperly set. Make sure you press the BROIL
HIGH/LOW pa d.
* Improper rack position being used. See tile Bmilit_g'guide.
* Food being cooked in a hot pan. Use the broiling pan and grid that
came with your oven. Make sure that it is cool.
* Cookware not suited flw broiling. Use the broiling pan and grid that
came
with
yOtlr ovell.
* The probe is plugged into the oudet in the oven, Remove the probe
,q'om the oven.
* Aluminum flfil used on the broiling pan and grid has not been fitted
properly and slit as recommended.
* In some areas the power (w)ltage) may be low. Preheat the broil
element fl_r 10 minutes. Broil fl_r the longest period of time
recommended in the Bmilb_g"
truide.
* The oxen temperatm'e is too hioh_ to set a selfZclean operation.
Allow the oven to cool and reset tile controls.
* Oxen controls improperl) set. See the Uising" the Se(/zCleanir_g" Oven
section.
* The probe is l)lugged,, into the oudet in the oxen. Remove the probe
froI// tile
()veil.
"CRACKING" OR * This is normal. It is the sotmd of the metal heating and cooling
"POPPING" SOUND during both cooking and cleaning iunctions.
I_NCESSIVE SMOKING * Excessive soil, Press the CLEAR/OFF pad, Open the windows to rid
DURING CLEAN the room of smoke. Wait tmtil the I,OCKED light goes off.
CYCLE Wipe up the excess soil and reset the clean cycle,
4/