Step 3, Install Side Panels; Step 4, Install Anti-_P Brackets - GE Monogram ZISB420DRK Design And Installation Manual

Installation Instructions
ISTEP 2AI INSTALLATION WITH
HOUSEHOLD WATER
FILTRATION SYSTEM
Skip this step if you do not have a household
water filtration system
If the water supply to the refrigerator is fl'om any
household water filtration system, the filter cartridge
should be removed. For better ice and water
pertimnance, remove the filter and install the filter
bypass plug.
ISTEP 31
INSTALL SIDE PANELS
Skip this step when not using side panels,
If you are using 1/4" side panels, they should be
inserted into the case trim. Fasten the panels to the
refrigerator with stick-on hook and loop fastener
strips betin'e setting reli'igerator in place.
12
I STEP 41 INSTALL ANTI-TIP BRACKETS
WARNING: Am,-T,P PRECAUT,ONS
The refrigerator is top-heaxy and must be secured to
prexent the possibility of tipping forward.
ATTENTION:
PRECAUTIONS CONTRE LES
BASCULEIVIENTS
I,e rg_frig_rateur est beaucoup plus lom'd en haut et il
flint le maintenir en place pour (_xiter la possibilit(_ de
son basc/llelllent x, ers l'axant.
• Cut a 2" x 4" block, 35" long and secure the block
to the motmting brackets proxided using # 12 or # 14
wood screws.
2 x 4 Cut_*_'/_-
35" Length ___j_
J \
Installation Mounting
Height Bracket
From Floor
ScrewsMountedintoJ'
Vertical Wall Studs
• Secure the bracket with wood block to the back wall
so that it is 84" (or yore" installation height) fl'om
the finished floor. Use #12 or #14 wood screws.
See illustration.
Brackets
Required
Height
From
Floor
to
Bottom
of Wood
Block
Brackets
-- Not Required
__ Beneath a
Soffit
SideView
• Screws must penetrate at least one inch into _ertical
wall studs.
• Before pushing the refrigerator into the oi)ening,,
plug the power cord into the receptacle. Open the
grille panel and reach into the opening at the back
to grasp the power cord. Pull the power cord into
the opening as )ou push the refrigerator back.
• Gently push refrigerator into the opening with
hands against front corners.
IMPORTANT NOTE:When the refrigeratoris installed undera soffit or
if there is not enoughheightfor this methodof security,bracketscannot
be used.Proceed to step Bto levelthe refrigeratorandthen to step 7
to securerefrigeratorto cabinets.Seestep 6 if you havemetalwall
studs.The refrigeratormustbe securedto preventtipping.