3/4" Overlay Panel Dimensions - GE Monogram ZISB420DRK Design And Installation Manual

Design Guide
3/4" OVERLAY PANEL DiMENSiONS
For a more c_stom aI)pearam_ce, overlay i)m]els may be
im_sta]]ed on trimmed mode]s_ The overlay pam_e] midst
be secm'ed to a 1/4'* thick bac] er pam_e] _h]c]] slides
im_ to the tri m. A spa cer pan e] 0. ] 0" thick m I_st be
p]ace(] betweeN_ the overlay am_d backer pm_ el.
Assemble the pm_e]s wit]] gh_e m_d screws.
* Center the spacer pam_e] om] the backer pam_e], left to
right amid top to bottom. Secm'e the pm_e]s _dth gh_e.
* C,eN_ter the spacer amid backer [xme] o]] the overlay
pa N_ e] am_d secl*re with glue a N_ d screws. Screws m i_st
be com_tersm_k im_to the backer paN, el.
IMPORTANT
NOTE
- DISPENSER MODELS
The refiigerator is sui)plied with two dispenser trims,
one for ti'amed panels and one ti)r oveday panels.
The overlay dispenser trim is designed to fit a total
panel thickness of 1,100",
• If the panel is less than 1.100" a noticeable gap may
be created arotmd the dispenser trim.
• If the panel is more than 1,100" the dispenser trim
cannot be secured to the (loot'.
See Dispenser Trim Fit Example, page 9.
_E
Door
I/4"
Backer 1O"
Panel
_Bpacer
Overlay Panel
' Backer Panel
NOTE: Left-to-right offset
is not always equal to
top-to-bottom offset,
.250" + .10" + .750" = 1.100"Total Panel Thickness
• The overlay panel must be constructed according to
the specifications shown to achieve the correct total
thickness.
• Alternative panel construction methods such as
secming a 3/4" panel to a 1/4" backer panel cannot
be used. Another method, routing a 3/4" thick
panel on all sides cannot be used. These methods
will not result in the required 1,100" panel thickness,
When a raised panel design is to be used, a custom
middle rail is required, Nee page 9 for details,
Grille Panel ]E
F
Dispenser
Cutout
C
Freezer Fresh Food
Panel Panel
I--D
_E_
Dispenser C utout
15-3/8"
*Cut the dispenser opening after the backer, spacer and overlay
panels have been assembled.
IMPORTANT NOTE: Maximum total weight for the assembled
panels:
• Fresh food door panel-75 Ibs.
• Freezer door panel -53 Ibs.
• Grille Panel - 18 Ibs.
1_ 9-5/8" _1
36" Side-by-Side (in inches)
1/4"Backer Panel 33-7/8 9 68-3/8
.10"SpacerPanel 33 8-3/8 67
3/4"Overlay Panel 34-1/8 9-1/4 68-5/8
42" Side-by-Side (in inches)
14-9/16 18-9/16
13-1/4 17-1/4
14-13/16 18-13/16
1/4"Backer Panel 39-7/8 9-1/2 68-3/8 14-9/16 24-9/16
.10"SpacerPanel 39 8-5/8 67 13-1/4 23-1/4
3/4"Overlay Panel 40-1/8 9-3/4 68-5/8 14-13/16 24-13/16
48" Side-by-Side (in inches)
1/4"Backer Panel 45-7/8 9-1/2 68-3/8 18-9/16 26-9/16
.10"SpacerPanel 45 8-5/8 67 17-1/4 25-1/4
3/4"Overlay Panel 46-1/8 9-3/4 68-5/8 18-13/16 26-13/16
8