1/4" Framed Panel Dimensions - GE Monogram ZISB420DRK Design And Installation Manual

Design Guide
1/4" FRAMED PANEL DiMENSiONS
lf_ou choose
to ira)stall framed
ixme]s, they midst be
clot to the sbowm The pam_e]s
_rd]]
slide
im_to the frame o]_ the door amid grille.
Non=Dispenser Models
If the cl_stom p;me] is less tbam_ 1/4" thick amid it fits
loosely im_ tile door fl'ame it cam_ be backed I_[_ with
a piece of filler material or fl)am tape to improve
the fit.
Door
\
i
i
t
777_ _ Trim
Reveal
I/4"
Panel
IMPORTANT NOTE: Maximum total panel weight:
• Fresh food door panel-75 Ibs.
• Freezer door panel -53 Ibs.
• Grille Panel - 18 Ibs.
IMPORTANT NOTE - DISPENSER MODELS
The refiigerator is sui)plied with two dispenser trims,
one for fl'amed panels and one for overlay panels.
• If the panel is less than 0.250" thick a noticeable
gap may be created aroui]d the dispenser trim.
Foam tape may be applied on the door to improve
the fit.
• If the panel is more than 0.950" thick, the
dispenser trim cannot be secured to the door.
See Dispenser Trim Fit Example, page 9.
Grille Panel E
7
F
Dispenser
Cutout
C
Freezer Fresh Food
Panel Panel
D E
DispenserCutout
I_ 9-5/S"
Side-by-Side (in inches)
15-3/8"
The framed panel must be 1/4" nominal thickness
to fit the dispenser trim.
36"Models 33-7/8 9 68-3/8 14-9/16 18-9/16
42"Models 39-7/8 9-1/2 68-3/8 14-9/16 24-9/16
48"Models 45-7/8 9-1/2 68-3/8 18-9/16 26-9/16