GE Monogram ZISB420DRK Design And Installation Manual page 19

Installation Instructions
]STEP 13] CHECK POWER, CLOSE
GRILLE PANEL
• C_heck to be sm'e the power cord is I_]m"°ed_ im_to
s _
- - - F_ise [
- - -I Grille
It÷_____ !
Electrical
MasterLight Outlet
Switch
• Check to make
slate power to rei_'igerator
is on bv
opem_im_gre_'igerator door to see if h_terior lights
_u'e 011.
• The tem[)eratm'e col_tro]s are preset at 37°F %r
tlle f_'esh fbod sectiol/ am_ d 0°F for th e freezer.
• Allow 24 horn's to stabilize heR)re makim_g
]STEP 14] START JCEMAKER
PowerSwitch
\Green PowerLight
* Flip the swhch to l (ON). The icemaker will begim_
operation automatica]]y;
* Be sm'e mmthim_g im_terti_res v,rith the s_eep of the
fi_e]er arm.
* Discard the first h_]] bl_( ]<et of ice cubes.
* To tm'l_ the icemaker off, set the switch to () (OFF).
[STEP 15] INSTALL TOEKJCK
* l,ocate the supplied toekick (shipped taped to
the side of the re{rige_m_r), h_sta]] with 2 screws
provided, adjust to desired height amid tightem_
screwso
* € custom toekick can be h_stalled to match or
the surrom_dim_g cabim_etr_. [Jse the
supp]ied toekick as a temp]ate to cut the shape.
SuppliedT0ekick
%
1/4" or ThickerToekick
.% "%
INSPECT FINAL INSTALLATION
Check door aligmnent
Stand back awav fl'om tile refligerator to inspect tile
final installation.
• Check to be sm'e handles are evenly aligned with
each other at the top. To
at!just,
loosen handle
screws and slide up or down. Tighten screws.
• During shipping or the addition of heavv door
panels may have caused the doors to move slightly
out of alignment.
Epr_=zr-¢
"Door Outof
Alignment
\
Bushing \
\
• If necessary tile fresh food door may be ac!iusted
up or down to align with the freezer door.
• Use a :3/16" wrench to ac!iust the hinge pin as
shown.
19