Table of Contents
Advertisement
3
• Side panels are required whenever the sides
S tep
• Side panels are not required when the
Install
Side
• Side panel installation will be determined by
Panels
• Side panels must be installed plumb.
Illustration A
1/4" Side Panels –
Insert end of side
panel into case trim.
Fasten with Velcro
strips included.
Standard 4" high toekick or trim to fit. Height
may vary depending on application.
Illustration C
1/2" to 3/4" Side
Panels – Recessed
front edge of side
panel. Fasten to
adjacent cabinet.
Standard 4" high toekick or trim to fit.
Height may vary depending on application.
4
Step
Roll
Refrigerator
Into Opening
of the refrigerator will be exposed and when
installed between frameless cabinets. See
pages 3 and 4.
refrigerator is installed into an enclosure.
the design of the side panel you have previ-
ously chosen.
23-9/16"
84"
Trim
2-9/16"
Top View
23-5/16"
84"
2-5/16"
Top View
• The cardboard protective pad should be
beneath the refrigerator.
• Gently push refrigerator into opening with
hands against front corners.
• Roll refrigerator into the opening until it is
flush with adjacent cabinets.
Installation
Stainless Steel Built-In Refrigerators
• If you choose to use 1/4" side panels, they
should be inserted into the case trim as
illustrated. Fasten the panels to the refrigera-
tor with velcro strips (provided) before setting
refrigerator in place. See illustration A.
• 1/2" to 3/4" side panels are normally set into
place and fastened to adjacent cabinetry or
the back wall before rolling the refrigerator
into the opening. See illustrations B and C.
Illustration B
1/2" to 3/4" Side
Panels – Leading
edge of side panel is
flush with cabinet
front. Fasten to the
back wall using a
cleat.
84"
Top View
Standard 4" high toekick or trim to fit.
Height may vary depending on application.
24-3/4"
3-3/4"
9
Advertisement
Table of Contents
