Step 3, Install New Side Trim; Step 4, Install Side Panels - GE ZICP720 Design Manual With Installation Instructions

3 INSTALL NEW SIDE TRIM
CAUTION:
Handle parts with care to avoid
scratching.
PRUDENCE :
Manipulez les pièces
soigneusement pour éviter de les rayer.
A. Install inside case trims (B & C) with notches
toward the bottom. Install screws (I) through 5 slots
on each trim.
4 INSTALL SIDE PANELS
Side panels must be used whenever the sides
of the refrigerator will be exposed. The 1/4"
side panels will slip into the side case trim.
Secure the panels to the refrigerator with
stick-on hook and loop fastener strips. Order
the side panels from the cabinet manufacturer.
• Cut a notch in the top front corner as shown
to allow clearance for corner keys in the front
side trim.
Skip this step if you are not using side panels.
Installation Instructions
8
B. Apply the supplied foam spacer pads (H) to the
mating side of one product as shown.
* Depending on
installation height.
Foam Spacer
Pads
24"
3/16"
1-7/8"
*84"
*3" to 4"
2-9/16"