Xerox WorkCentre 5020DN User Manual page 69

For security reasons, as you enter each
digit of the passcode, a hyphen appears
in the Display instead of the actual
number that you enter.
4.
Press the <Start> button to confirm the
entered passcode.
If the entered passcode is correct, the
machine enters the Copy Mode, and [1]
appears in the Display.
5.
The indicator next to the <Log In/Out>
button is lit while you are logged in to
the machine.
NOTE: You do not need to log in to the
machine for a scan job. If you wish to run a
scan job after logging in, simply press the
<Scan> button to switch the machine to the
Scan Mode.
Logging in to the Machine
<Start> button
<Log In/Out>
button
69