Power Saver - Xerox WorkCentre 5020DN User Manual

2 Product Overview
2.
Press the Power Switch to the [ ]
position.
NOTE: After pressing the Power Switch to
the [ ] position, wait for a few seconds
before removing the power cord from the
power outlet to allow the machine time to
power off completely.
NOTE: After switching off the machine, wait
for a few seconds before switching the
machine back on again.

Power Saver

The machine has a power-efficient feature called Power Saver to minimize power
consumption during inactivity. When the machine is inactive for a specified period of
time, it activates the Power Saver feature.
The Power Saver feature has two stages: Low Power Mode and Sleep Mode.
The machine enters the Low Power Mode first if it remains inactive for a preset period
of time. Then it enters the Sleep Mode to further reduce power consumption.
Low Power Mode
When the machine enters the Low Power Mode, the machine reduces the power to the
Fuser Unit.
While the machine is in this mode, the Display goes out, and the <Power Saver> button
is lit. If scanned data is stored in mailboxes, the <Job in Memory> indicator is also lit
during this mode. To exit the Low Power Mode to use the machine, press the <Power
Saver> button.
To specify how long the period of inactivity is before Power Saver is activated, access
the System Setting Mode (menu number: 12). For more information, refer to the
System Administration Guide.
Sleep Mode
When the machine enters the Sleep Mode, the machine further reduces its power
consumption.
While the machine is in this mode, the Display goes out, and the <Power Saver> button
is lit. If scanned data is stored in mailboxes, the <Job in Memory> indicator is also lit
during this mode. To exit the Sleep Mode to use the machine, press the <Power Saver>
button.
To specify how long the period of inactivity is before Power Saver is activated, access
the System Setting Mode (menu number: 13). For more information, refer to the
System Administration Guide.
NOTE: You can specify the Low Power Mode and Sleep Mode settings on
CentreWare Internet Services. For more information, refer to the Machine Status
chapter in the System Administration Guide.
36