Log In/Out> Button; Power Saver> Button; Ac> (All Clear) Button - Xerox WorkCentre 5020DN User Manual

2 Product Overview
<Log In/Out> button
Use this button to enter the System Setting
Mode, which allows you to configure the
system settings.
When Copy Auditron is disabled
Hold down this button for four seconds, and
then enter the System Administrator's ID
using the numeric keypad.
The machine enters the System Setting
Mode.
When Copy Auditron is enabled
First you must log in to the machine under the System Administrator's ID, and then hold
down this button for four seconds.
The machine enters the System Setting Mode.
For more information on how to log in to the machine, refer to
on page 68
refer to the System Administration Guide.
<Power Saver> button
To minimize power consumption, the Power
Saver feature is automatically activated
during periods of machine inactivity.
For more information on the Power Saver
feature, refer to
<AC> (all clear) button
Press this button to clear the previously
selected features, and to restore the default
values of the features.
24
. For more information on the System Setting Mode and Copy Auditron,
Power Saver on page 36
Logging in to the Machine
.
<Log In/Out>
button
<Power Saver>
button
<AC> button