1111111111
11.
Lift away the LCD screen assembly.
Main Board
To remove the main board, first remove the battery (see Battery), the HDD (see
ROM or DVD drive (see
memory (see Memory), the CPU (see Processor), the keyboard (see Keyboard), remove the LCD screen
(see
LCD Screen
Assembly), and then perform the following steps:
1. Turn the notebook over so the top is facing up.
2. Remove the 4 screws that were covered by the LCD screen and the 4 screws in the heat plate.
3. Turn the notebook upside down.
4. Remove the 4 small screws in the hard disk drive compartment.
Optical Disk
Drive), the wireless network card (see
Fig. 17 Location of screws.
Fig. 18 Location of screws in HDD compartment.
Packard Bell EasyNote MX Disassembly Manual
Hard Disk
Drive), the CD-
WLAN
Card), the installed
11