3. Lift up the keyboard and disconnect it from the system as shown in Fig. 16
Removing the Main Board
To remove the Main Board , first remove the battery (see
Keyboard (see
Removing
1. Use small flat screwdriver to remove hinge cover and release screws near to battery
compartment at both side.
Fig. 16 Disconnect keyboard flat cable
Keyboard) then perform the following steps:
Fig. 17 Removing the top cover screws
NEC Versa E680/PB EasyNote E5 Disassembly Manual
Removing the
Battery), remove
M4.5x3.5 Black
Page 14