Packard Bell MX Disassembly Manual page 11

1010101010
10
4. Remove the 4 hinge screws on the back of the notebook securing the LCD screen.
Fig. 13 Location hinge screws.
5. Remove the middle hinge cover.
6. Carefully disconnect the 2 (white) block connectors.
Fig. 14 Location of block connectors and screws.
7. Slide the left and the right hinge cover outward.
8. Remove the screw in the left and the right hinge.
Fig. 15 Location of screw in hinge.
9. Turn the notebook upside down.
10. Remove the tape (if used) securing the WLAN antenna cable and unhook it from the plastic tabs.
Fig. 16 The wireless antenna cable.
Packard Bell EasyNote MX Disassembly Manual