Keyboard - Packard Bell MX Disassembly Manual

88888
4. Remove the 4 screws securing the heat sink in designated order.
5. Remove the heat sink.
6. Turn the screw in the CPU socket 180 degrees to release the CPU.
7. Take out the CPU.

Keyboard

To remove the keyboard, first remove the battery (see Battery) and then perform the following steps:
1. Remove the 7 screws retaining the CPU cover (see
2. Remove the 4 screws labelled K>.
3. Turn the notebook over so the top is facing up.
Fig. 9 Location of heat sink screws.
Fig. 10 Location of K> screws.
Packard Bell EasyNote MX Disassembly Manual
Fig. 1).
8