Removing The Main Board - Packard Bell EasyNote T5 SEries Disassembly Manual

2. Carefully remove the DC/DC board as shown in Fig. 32 and put it aside.

Removing the Main Board

To remove the Main board, first open the Top Cover (see
DC/DC board (see
1. Remove the screws holding the main board in place as shown in Fig. 33
Fig. 31 DC/DC Board
Fig. 32 Removing the DC/DC Board
Removing DC/DC board) then perform the following steps:
Packard Bell EasyNote T5 Disassembly Manual
Removing the Top Cover), remove
M2.5x11 Black
Page 20