Lcd Panel - Packard Bell MX Disassembly Manual

1515151515
2. Remove the 3 screws securing the subwoofer (one of the screws is not visible in
3. Remove the subwoofer assembly.

LCD Panel

To disassembly the LCD panel, first remove battery (see Battery), the HDD (see
CD-ROM or DVD drive (see
installed memory (see Memory), the CPU (see Processor), the keyboard (see Keyboard), remove the
LCD screen (see LCD Screen
1. Remove the 5 rubber stoppers.
2. Remove the 5 screws that appeared after removing the rubber stoppers (see
3. Carefully remove the LCD cover which has been clicked into place.
4. Disconnect the power cable from the inverter board.
Fig. 25 Location of subwoofer screws.
Optical Disk Drive), the wireless network card (see
Assembly), and then perform the following steps:
Fig. 26 Location of rubber stoppers.
Fig. 27 Location of inverter board.
Packard Bell EasyNote MX Disassembly Manual
Fig. 25).
Hard Disk Drive), the
WLAN Card), the
Fig. 26).
15