99999
4. There are 4 small slots at the location shown in
each slot to unlatch the keyboard.
5. Tilt the keyboard gently forward.
6. Before removing the keyboard entirely, carefully disconnect the keyboard flat cable from the main
board.
LCD Screen Assembly
To remove the LCD screen assembly, remove the battery (see Battery), disconnect the wireless antenna
cables (see
WLAN
Card), and then perform the following steps:
1. Turn the notebook upside down.
2. Remove the 4 screws shown in
3. Turn the notebook over so the top is facing up.
Fig. 11 Location of latches securing keyboard cover.
Fig.
12.
Fig. 12 Removing 4 bottom screws.
Packard Bell EasyNote MX Disassembly Manual
Fig.
11; insert a small flat-blade screwdriver in
9