Modem - Packard Bell MX Disassembly Manual

1212121212
5. Remove the 8 remaining screws from the bottom plate.
6. Remove the dummy card (optional) from the card reader and/or the ExpressCard slot.
7. Carefully remove the top cover.
Note: The top cover has been clicked into place; you might need to use some force to detach it.
8. Disconnect the speaker cable (red/black twisted wires) and the optional subwoofer cable
(white/black and red/black twisted wires).
9. Carefully disconnect the optional Bluetooth cable from the main board (see
10. Remove the 3 screws securing the main board (see
11. Extract the main board from the casing.
12. Optionally, you might need to remove the modem (see Modem).

Modem

To remove the modem, first remove the battery (see Battery), the HDD (see
ROM or DVD drive (see
memory (see Memory), the CPU (see Processor), the keyboard (see Keyboard), remove the LCD screen
(see LCD Screen Assembly), the main board (see
1. Disconnect the modem cable from the modem.
2. Remove the 2 screws securing the modem and take out the modem.
Fig. 19 Location of screws and speakers and subwoofer cables.
Optical Disk Drive), the wireless network card (see
Fig. 20 Location of modem screws.
Packard Bell EasyNote MX Disassembly Manual
Fig. 19)
Main Board), and then perform the following steps:
Fig. 21).
Hard Disk Drive), the CD-
WLAN Card), the installed
12