Main Board; Cpu - Packard Bell EasyNote GN45 Disassembly Manual

1212121212
3. Disconnect the VGA cable.

Main Board

To remove the main board, first remove the top cover (see
steps:
1. Remove the four screws securing the main board.
2. Pull the main board towards the right side and upward to extract it from the casing.

CPU

To remove the CPU, first remove the main board (see
1. Remove the screws securing the heat sink.
Packard Bell EasyNote GN45 Disassembly Manual
Fig. 20 Disconnecting the VGA cable.
Fig. 21 Removing the main board screws.
Main
Top Cover) and then perform the following
Board) and then perform the following steps:
12