Battery; Hard Disk Drive - Packard Bell MX Disassembly Manual

44444

Battery

Perform the following steps to remove the battery:
1. Make sure the power is off.
2. Turn the notebook upside down.
Note: Use an anti-static mat or something soft like a piece of cloth underneath the notebook to prevent damage
to the exterior of the notebook.
3. Push the 2 locks in the direction of the arrows to the release the battery compartment cover and
remove the cover.
4. Take the battery out of the compartment.

Hard Disk Drive

To remove the HDD, first remove the battery (see Battery) and then perform the following steps:
1. Remove the 2 screws on the hard disk drive cover and remove the cover (see
2. Pull the plastic tab on the hard disk drive towards you as shown in
3. Take the drive out of its compartment.
Fig. 1 Removing battery.
Fig. 2 Removing hard disk drive.
Packard Bell EasyNote MX Disassembly Manual
Fig. 1).
Fig. 2 to disconnect the drive.
4