Speakers; Subwoofer (Optional) - Packard Bell MX Disassembly Manual

1414141414
2. Disconnect the 2 flat cables and separate the part from the top cover (see
Note: The touchpad area and the buttons are separate parts: the touchpad area is part of the top cover. To
replace the touchpad area, disconnect all flat cables on the top cover and replace the entire top cover.

Speakers

To remove the speakers, first remove the battery (see Battery), the HDD (see
ROM or DVD drive (see
memory (see Memory), the CPU (see Processor), the keyboard (see Keyboard), remove the LCD screen
(see LCD Screen Assembly), the main board top cover up to step 7 (see
the following steps:
1. Disconnect the speaker cable from the main board (see
2. Remove the 2 screws on both speakers and remove the speakers.

Subwoofer (Optional)

To remove the optional subwoofer, first remove battery (see Battery), the HDD (see
CD-ROM or DVD drive (see
installed memory (see Memory), the CPU (see Processor), the keyboard (see Keyboard), remove the
LCD screen (see LCD Screen
then perform the following steps:
1. Disconnect the subwoofer cable from the main board.
Optical Disk Drive), the wireless network card (see
Fig. 23 Location of speaker assembly screws.
Optical Disk Drive), the wireless network card (see
Assembly), the main board top cover up to step 7 (see
Fig. 24 Disconnecting the subwoofer cable.
Packard Bell EasyNote MX Disassembly Manual
Fig. 22).
Hard Disk
WLAN Card), the installed
Main Board), and then perform
Fig. 19).
Hard Disk
WLAN Card), the
Main
14
Drive), the CD-
Drive), the
Board), and