Download  Print this page

Advertisement

HOME CINEMA SYSTEM
MODEL
AN-PR1000H
OPERATION MANUAL
Thank you for purchasing this SHARP product. To obtain the best
performance from this product, please read this manual carefully.
It will guide you in operating your SHARP product.
06/6/12
AN-PR1000_FRONT.fm
TINSEA127AWZZ

Advertisement

   Also See for Sharp AN-PR1000H

   Related Manuals for Sharp AN-PR1000H

   Summary of Contents for Sharp AN-PR1000H

  • Page 1 HOME CINEMA SYSTEM MODEL AN-PR1000H OPERATION MANUAL Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. 06/6/12 AN-PR1000_FRONT.fm TINSEA127AWZZ...
  • Page 2: Table Of Contents

    Special Notes Contents AN-PR1000H Page "DTS" and "DTS Digital Surround" are registered trademarks of Digital Theatre Sys- General Information tems, Inc. Accessories ............3 Precautions .
  • Page 3: Accessories

    Accessories AN-PR1000H Please confirm that the following accessories are included. Top glass cover x 1 Glass shelf x 1 Top glass cover glass shelf Metal frame Metal frame Metal frame x 1 screws x 4 cushion x 8 Safety wires x 2 Wire clips x 5 Support wires Washer x 4...
  • Page 4: Precautions

    Keep the unit away from direct sunlight, strong magnetic fields, excessive dust, other types of accident, causing damage. SHARP will not be held responsible for any humidity and electronic/electrical equipment (home computers, facsimiles, etc.) damage resulting from the use of this unit with a voltage other than that specified.
  • Page 5: Controls And Indicators

    Controls and indicators AN-PR1000H Main unit (front panel) Main unit (rear panel) Reference page Reference page 1. Left Front Speakers 1. Screw Hole for safety wire ....... 13 2.
  • Page 6 Controls and indicators (continued) AN-PR1000H Main unit (rear panel) Reference page 1. Optical Digital Audio Input Sockets ..... 14, 15 2.
  • Page 7 AN-PR1000H Display 13 14 Reference page Reference page 1. Mono to Stereo indicator ....... . 24 11.
  • Page 8 Controls and indicators (continued) AN-PR1000H Remote control Reference page 1. Remote Control Transmitter ......17 2.
  • Page 9 AN-PR1000H DVD Player Operation Buttons (Page 35 - 36) ON/STAND-BY button Menu/Top Menu Button Sets the DVD power to Press to display the "ON" or "STAND- BY". menu. TV Operation Buttons (Page 35) Cursor Buttons Return Button Volume Up and Down Buttons Press the button to se- Press the button to re- Turn down/up the TV vol-...
  • Page 10: System Connections

    System connections AN-PR1000H Installing the main unit and the subwoofer Aerial connection Supplied FM aerial: 1. Pull up both speakers outwards. Connect the FM aerial wire to the FM 75 OHMS socket and position the FM aerial wire in the direction where aerial the strongest signal can be received.
  • Page 11: Subwoofer Connection

    AN-PR1000H Subwoofer connection Using other subwoofer You can connect a subwoofer with an amplifier to the SUBWOOFER PRE OUT sock- Make sure to leave the AC power lead disconnected when connecting the sub- woofer. 1. Connect the wire to the speaker terminal. Commercially available subwoofer Audio cable (amplifier built in)
  • Page 12 System connections (continued) AN-PR1000H Placing the TV or other equipment 2. Placing the TV, DVD player and etc equipment. Please use anti-slip TV cushion to prevent fall. 1. Please ensure that the equipment is positioned in a well-ventilated area and ensure that there is at least 10 cm (4") of free space along the sides and back of the equipment.
  • Page 13: Falling Prevention

    Falling prevention AN-PR1000H Safety wires are useful to prevent the TV from falling off in case of earthquake occurance. Screw Fix the washer and screws behind the TV. Pull out the rubber Washer blocker located behind the TV. Hang the safety wire on the screw, between the washer and the TV.
  • Page 14: Audio Connections To Tvs, Dvd Players, Vcrs, Etc

    Audio connections to TVs, DVD players, VCRs, etc. AN-PR1000H Connecting a TV, etc. Caution: Connect to the TV using an optical digital audio cable or an audio cable. Turn off all other equipment before making this connection. To audio The drawing below shows the flows of audio and video signals. output sockets Audio signal Video signal...
  • Page 15 AN-PR1000H Connecting a DVD player, etc. Connecting a VCR, etc. Connect to the DVD player with an optical digital audio cable or an audio cable. Connect to the VCR with an audio cable. To audio output DVD player sockets To audio output sockets Audio cable (supplied or...
  • Page 16: Ac Power Connection

    AC power connection Audio connections to TVs, DVD AN-PR1000H players, VCRs, etc. (continued) Connecting the AC power lead After checking all the connections have been made correctly, connect the AC power Connecting a digital tuner, etc. lead to the AC power input socket, then to the wall socket. Connect to the digital tuner, etc.
  • Page 17: Remote Control

    Remote control AN-PR1000H Battery installation Notes concerning use: Replace the batteries if the operating distance is reduced or if the operation be- comes erratic. Use 2 "AAA" size batteries (UM-4, R03, HP-16 or similar). Periodically clean the transmitter on the remote control and the sensor on the unit Batteries are not included.
  • Page 18: General Control

    General control AN-PR1000H Volume control Main unit operation: Press the VOL + button to increase the volume and the VOL - button for decreasing. Remote control operation: ..00 01 Press the VOL. + button to increase the volume and the VOL. - button for decreasing. Muting The volume is muted temporarily when pressing the MUTE button on the remote control.
  • Page 19: Setting The Clock

    Setting the clock AN-PR1000H By setting the unit to the correct time, you can use it not only as a clock but also for Hold down the SHIFT button and timer playback. press the button to adjust the hour and then press the ENTER button.
  • Page 20: Listening To The Playback Sound From Dvd Players, Vcrs, Etc

    Listening to the playback sound from DVD players, VCRs, etc. AN-PR1000H Turn on the connected equipment. Press the ON/STAND-BY button to turn the power on. Select the source to be played back. Remote control operation: To select a digital source, press the corresponding button. Press the LINE button repeatedly to select the LINE input.
  • Page 21: Enjoying Surround Sound (sound Mode)

    Enjoying surround sound (sound mode) AN-PR1000H Preset sound modes and sound image Enhanced bass sounds create clear- cut and spacious sounds at 2.1ch. You can enjoy normal stereo sounds. Appropriate for music, etc. Voice of narration comes out from the Enjoy a wide sound field like 5.1ch as centre;...
  • Page 22 Enjoying surround sound (sound mode) (continued) AN-PR1000H Preset sound mode Select any of the 6 preset modes already set to the optimal sound quality levels. Select a desired sound mode by pressing the SOUND MODE button. Preset sound mode Display STANDARD CINEMA NEWS...
  • Page 23 AN-PR1000H Dolby Virtual Speaker (DVS) sound mode The Dolby Virtual Speaker creates multichannel-like sound effects. The Dolby Virtual Speaker (DVS) creates virtual surrounds comparable to the 5.1ch sound produced by the 2.1ch speaker. Compared with the cinema mode, the bass sound level is slightly re- When setting DVS to "ON"...
  • Page 24 Enjoying surround sound (sound mode) (continued) AN-PR1000H Audistry sound mode SOUND SPACE Enjoy a variety of sounds by each or any combination of the 4 modes. (Sound stage expansion) Press the button for your desired mode. The 4 speakers create spa- Press it again to cancel.
  • Page 25 AN-PR1000H This product incorporates decoders supporting the Dolby Digital system and DTS system. DTS (Digital Theatre Systems) One of the digital audio systems for theatrical use. As the sound quality is emphasised, you can enjoy the realistic sound effect in the home theatre system.
  • Page 26: Listening To The Radio

    Listening to the radio AN-PR1000H Tuning Press the ON/STAND-BY button to turn the power on. Press the TUNER button repeatedly to select the desired frequency band (FM Stereo/FM Mono). Hold down the SHIFT button and press the (TUNING ) but- ton to tune in to the desired station.
  • Page 27 AN-PR1000H Memorising a station To recall a memorised station You can store 40 FM stations in memory and recall them at the push of a button. (Pre- Hold down the SHIFT button and press the PRESET ( ) button for less than set tuning) 0.5 seconds to select the desired station.
  • Page 28: Using The Radio Data System (rds)

    Using the Radio Data System (RDS) AN-PR1000H Information provided by RDS RDS is a broadcasting service which a growing number of FM stations provide. These FM stations send additional signals along with their regular programme Press the SHIFT button and then the RDS DISPLAY button. The display changes signals.
  • Page 29 AN-PR1000H To stop the ASPM operation before it is complete: Using the Auto Station Programme Press the RDS ASPM button whilst it is scanning for stations. Memory (ASPM) The stations which are already stored in memory will be kept there. Whilst in the ASPM operation mode, the tuner will automatically search for new RDS Notes: stations.
  • Page 30 Using the Radio Data System (RDS) (continued) AN-PR1000H Notes: To recall stations in memory If the display has stopped flashing, start again from step 2. If the unit finds a desired To specify programme types and select stations (PTY search): programme type, the corresponding channel number will flash for about 4 seconds, You can search a station by specifying the programme type (news, sports, traffic pro- and then the station name will flash for 7 seconds, which will remain lit.
  • Page 31 AN-PR1000H Descriptions of the PTY (Programme Type) codes, TP (Traffic Programme) and CHILDREN For programmes targeted at a young audience, primarily for en- TA (Traffic Announcement). tertainment and interest, rather than where the objective is to ed- You can search for and receive the following PTY, TP and TA signals. ucate.
  • Page 32: Timer And Sleep Operation

    Timer and sleep operation AN-PR1000H You can use the unit as an alarm clock by setting the timer. Setting the timer Before setting timer: Turn the power on and hold down the SHIFT button and press the 1 Set the unit to the correct time (page 19). TIMER button.
  • Page 33: Setting The Sleep Timer

    AN-PR1000H Setting the sleep timer To confirm the remaining sleep time: 1 Whilst "SLEEP" is indicated, hold down the SHIFT button and press the TIMER You can set the unit to the power stand-by mode at the specified time. button. 2 Within 10 seconds, press the SHIFT and buttons to select "SLEEP".
  • Page 34: Timer And Sleep Operation

    Timer and sleep operation (continued) AN-PR1000H After completing the setting To check the timer setting: 1 Whilst in the timer playback stand-by mode, press the SHIFT and TIMER buttons. When the timer setting is completed: 2 Within 10 seconds, hold down the SHIFT button and press the button to The unit is in the timer playback select "TIMER CAL", and press the ENTER button.
  • Page 35: Operating The Tv Or Dvd Player With The Remote Control

    You can operate Sharp's TVs and DVD players with this system's remote control. Watching TV If TVs or DVD players of Sharp or other manufacturers cannot be operated by the re- mote control, change the manufacturer setting code (see pages 37 - 38).
  • Page 36 Operating the TV or DVD player with the remote control (continued) AN-PR1000H Various operations of DVD player Depending on the DVD player model, some or all functions may not be operable using the remote control of this unit. In addition, a different function may be activated. In this case, use the remote control supplied with each product.
  • Page 37: Changing The Manufacturer Setting Of The Remote Control

    (*): The default manufacturer numbers are 2006 (SHARP) for DVD player. Notes: Some models of Sharp's TVs and DVD players may not be operable. As for manufacturers with 2 or more setting numbers, test them to select the right number.
  • Page 38: Radio

    1000, 1005, 1007, 1015, 1016, 1030 ZENITH 1006, 1019 ENVISION 1009 1032 FISHER 1021 1005, 1007, 1009, FORTRESS 1010 1015, 1016 FUJITSU 1023, 1029 1000, 1022 (*): The default manufacturer numbers are 1010 (SHARP) for TV. 06/3/14 06/3/14 AN-PR1000_EN.fm AN-PR1000_EN.fm TINSEA127AWZZ TINSEA127AWZZ...
  • Page 39: Troubleshooting Chart

    Troubleshooting chart AN-PR1000H Many potential problems can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorised SHARP dealer or service centre. General Remote control Symptom...
  • Page 40: Error Indicators And Warnings

    Error indicators and warnings Troubleshooting chart (continued) AN-PR1000H When you fail to perform operations properly, the following messages are displayed If trouble occurs on the unit. When this product is subjected to strong external interference (mechanical shock, ex- cessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is oper- Display Meaning ated incorrectly, it may malfunction.
  • Page 41: Maintenance

    Specifications As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The per- formance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
  • Page 42 MEMO 06/3/14 AN-PR1000_EN.fm TINSEA127AWZZ...
  • Page 43 OR CALL SHARP CUSTOMER CARE OR CALL 1300 135 022 SHARP CUSTOMER SERVICES TELEPHONE: 09 573 0111 (LOCAL CALL COST APPLY WITHIN AUSTRALIA) FACSIMILE: 09 573 0113 SHARP CORPORATION OF AUSTRALIA PTY LTD SHARP CORPORATION OF NEW ZEALAND LIMITED SPform019(JUNE 2004) 06/3/14 AN-PR1000_EN.fm TINSEA127AWZZ...
  • Page 44: Warranty

    Consumer Electronic Products Congratulations on Your Purchase! This Sharp product is warranted against faults in materials and manufacture for a period of twelve(12) months from the date of original purchase. If service is required during the warranty period, please contact your nearest Sharp Approved Service Centre.

Comments to this Manuals

Symbols: 0
Latest comments: