Setting The Sleep Timer - Sharp AN-PR1000H Operation Manual

Hide thumbs Also See for AN-PR1000H:
Table of Contents

Advertisement

Setting the sleep timer

You can set the unit to the power stand-by mode at the specified time.
1
During playback, hold down the SHIFT button and press the TIMER
button.
2
Within 10 seconds, hold down the SHIFT button and press the
button to select "SLEEP SET", and press the ENTER button.
3
Press the SHIFT and
or
but-
tons to select the time.
(Maximum: 2 hours - Minimum: 1 minute)
2 hours - 5 minutes
5-minute intervals
5 minutes - 1 minute
1-minute intervals
4
Press the SHIFT and ENTER
buttons.
"SLEEP" will appear.
5
The unit will enter the power stand-by mode automatically after the
preset time has elapsed.
The volume will be turned down 1 minute before the sleep operation finishes,
and then you cannot change the volume.
Caution:
This unit cannot set the sleep timer of other equipment.
To use the sleep timer using other equipment, you should also set the
timer on the equipment separately.
To confirm the remaining sleep time:
1 Whilst "SLEEP" is indicated, hold down the SHIFT button and press the TIMER
button.
2 Within 10 seconds, press the SHIFT and
Remaining sleep time
or
The remaining sleep time is displayed for about 10 seconds.
You can change the remaining sleep time whilst it is displayed by pressing the
SHIFT and ENTER buttons (steps 3 - 4).
To cancel the sleep operation:
Press the ON/STAND-BY button whilst "SLEEP" is indicated.
To cancel the sleep operation without setting the system to the stand-by mode, pro-
ceed as follows.
1 Press the SHIFT and TIMER buttons.
2 Within 10 seconds, press the SHIFT and
and press the SHIFT and ENTER buttons.
To use timer and sleep operation together
You can fall asleep and wake up to the radio.
1
Set the sleep timer (steps 1 - 4).
Sleep operation starts.
2
Set the timer playback.
("Setting the timer" on page 32, steps 1 - 7)
1
Sleep timer setting
2
Timer playback setting
1 minute - 2 hours
1minute - 2hours
Sleep operation will
Sleep operation
automatically stop.
starts.
06/3/14
AN-PR1000_EN.fm
AN-PR1000H
or
buttons to select "SLEEP".
or
buttons to select "SLEEP OFF",
Start time
Finish time
Desired time
Timer playback
Timer playback will
starts.
automatically stop.
TINSEA127AWZZ
1
2
3
4
5
6
7
8
33

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents