Sharp AN-PR1000H Operation Manual page 30

Using the Radio Data System (RDS) (continued)
AN-PR1000H
To recall stations in memory
To specify programme types and select stations (PTY search):
You can search a station by specifying the programme type (news, sports, traffic pro-
gramme, etc. ... see page 31) from the stations in memory.
1
Press the TUNER button to select the FM stereo.
2
Press the SHIFT button and press the RDS PTYI button.
SHIFT
"SELECT" and "PTY TI" will appear alternately for about 6 seconds.
3
Within 6 seconds, press the SHIFT button and PRESET (
button to select the programme type.
SHIFT
Each time the button is pressed, the programme type will appear. If the button
is held down for more than 0.5 seconds, the programme type will appear con-
tinuously.
4
Whilst the selected programme type is flashing (within 6 seconds),
press the SHIFT button and then the RDS PTYI button.
After the selected programme type has been lit for 2 seconds, "SEARCH" will
appear, and the search operation will start.
30
Notes:
If the display has stopped flashing, start again from step 2. If the unit finds a desired
programme type, the corresponding channel number will flash for about 4 seconds,
and then the station name will flash for 7 seconds, which will remain lit.
If you want to listen to the same programme type of another station, press the
SHIFT button and press the RDS PTYI button whilst the channel number or station
name is flashing. The unit will look for the next station.
If no station can be found, "NOTFOUND" will appear for 4 seconds.
If you select the traffic programme:
If you select the traffic programme (TP) in step 3, "TP" will appear. (This does not
mean that you can listen to the traffic information at that time.)
When the traffic information is broadcast, "TA" will appear.
To specify station names and select stations manually:
You can select a station by specifying the name (BBC R1, BBC R2, etc.) from the
stations stored in memory.
Before starting this operation, you must store one or more station names in memory.
1 Press the TUNER button to select the FM band.
2 Press the PRESET ( or
or )
3 The station name will be displayed for 6 seconds. Then the display will change.
06/3/14 06/3/14 AN-PR1000_EN.fm AN-PR1000_EN.fm
) button to select a desired station.
TINSEA127AWZZ TINSEA127AWZZ