Maintenance; Specifications - Sharp AN-PR1000H Operation Manual

Maintenance

Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a
dry cloth.
Do not use chemicals for cleaning (petrol, paint thinner, etc.). It may damage the
cabinet finish.
Do not apply oil to the inside of each component. It may cause malfunctions.

Specifications

As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The per-
formance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
Main unit
Amplifier section
Power source AC 220 V - 240 V, 50 Hz
Power consumption Power on: 80 W
Power stand-by: 0.6 W
Amplification system Front speaker: Pulse width modulation
Subwoofer: Pulse width modulation
Frequency range FM : 87.5 - 108 MHz
Output power Front speaker: RMS: 150W (75W + 75W) (10% T.H.D)
Subwoofer: RMS: 150W (75W + 75W) (10% T.H.D)
Audio input terminals Optical digital input (DIGITAL 1/2): Square type 2
Coaxial digital input (DIGITAL 3): RCA type 1
Analog input (LINE 1): RCA type 1 pair (L/R)
Analog input (LINE 2): RCA type 1 pair (L/R)
Analog input (LINE 3): RCA type 1 pair (L/R)
Audio output terminal Subwoofer Pre Out: 10 kohms
Front speaker section
Type 2-way type speaker system (Magnetic shield)
5 cm (2") Tweeter 1
10 cm (4") Woofer 1
Impedance 4 ohms
General
Dimensions Width: 1230 mm (48-7/16")
Height: 476 mm (18-3/4")
Depth: 383 mm (15-1/8")
Weight 46.5 kg (102.3 lbs.)
Subwoofer
Type Bass reflex system
16 cm (6-1/2") Woofer 1
Maximum input power 150 W
Impedance 4 ohms
Remote control
Power source DC 3V ["AAA" size (UM-4, R03, HP-16 or similar) battery
2]
06/3/14 AN-PR1000_EN.fm
AN-PR1000H
1
2
3
4
5
6
7
8
41
TINSEA127AWZZ