Operating The Tv Or Dvd Player With The Remote Control - Sharp AN-PR1000H Operation Manual

Operating the TV or DVD player with the remote control

You can operate Sharp's TVs and DVD players with this system's remote control.
If TVs or DVD players of Sharp or other manufacturers cannot be operated by the re-
mote control, change the manufacturer setting code (see pages 37 - 38).
Depending on the model, some or all functions may not be operable using the remote
control of this unit. In this case, use the remote control supplied with each product.
DVD operation
buttons
TV operation
buttons
SHIFT
Watching TV
Point the remote control at the TV...
1
Press the TV ON/STAND-BY button to turn on the TV.
2
Press the direct number buttons to set the channel.
Pressing the TV CH
3
Press the TV VOL. + or - button to adjust the TV volume.
Other operable button
Input Select Button
(TV/VCR)
Playing a DVD
Point the remote control at the DVD player...
1
Press the DVD ON/STAND-BY button to turn on the DVD.
2
Press the button.
Direct number
Playback starts.
buttons
3
Press the button.
Playback stops.
06/3/14
or button enables TV channel switching.
AN-PR1000_EN.fm
AN-PR1000H
1
2
3
4
5
6
7
8
35
TINSEA127AWZZ