3. CONTROLS
ROTO-STOP LEVER
The ROTO-STOP lever operates the blade brake/clutch
mechanism.
It is used
to start and stop the blade
To put the blade into operation,
press the button on top of the ROTO-STOP lever,
then push the lever forward
and hold it against
the handlebar.
Releasing
the ROTO-STOP lever will stop the blade
Operate the ROTO-STOP lever with a quick and complete
motion,
so the blade
drive is always either fully engaged or stopped. This will help to prevent stalling
the engine, and it will also extend the service life of the ROTO-STOP mechanism.
1
NoTlCE
1 If you move the RUlIMl7IP
lever slowly
or partially,
the blade
brake/clutch
mechanism
will wear out prematurely.
NOTE: Always
release the ROTO-STOP lever before starting
the engine
If the
blade drive is engaged,
extra effort
will be required to operate the starter.
ROTO-STOP
LEVER
BUTTON
13