Honda HR215SXA Owner's Manual page 28

5. PRE-OPERATION CHECK
HANDLEBAR HEIGHT
Check that the handlebar is in a
comfortable operating positon. If
necessary, readjust handlebar height.
1.
2.
3.
4.
Loosen both left and right height
adjuster locking bolts with a 12 mm
wrench.
Slightly loosen the lower handlebar
locking knobs. This will allow the
height adjusters to move more
easily.
Adjust the handlebar to a comfor-
table height.
Tighten the locking knobs, then
tighten the locking bolts.
CUTTING HEIGHT
Check the cutting height settings, and
make any necessary adjustments (see
page 17).
serious injury. Stop the engine before
adjusting cutting height.
LOCKING BOLT
HANDLEBAR
HEIGHT
LOCKING KNOB
ADJUSTER
ADJUSTING LEVER
26