Honda HR215SXA Owner's Manual page 19

3. CONTROLS
CUTTING HEIGHT ADJUSTMENT LEVERS
serious injury. Stop the engine before
adjusting cutting height.
There are six cutting height settings:
3/4 in (2.0 cm), l-1/4 in (3.3 cm),
l-3/4 in (4.5 cm), 2-l/4 in (5.6 cm),
2-5/8 in (6.7 cm), and 3 in (7.7 cm).
These are approximate figures, as the
actual height of cut grass will vary with
lawn and soil conditions.
To adjust cutting height, pull each
adjusting lever toward the wheel, and
move it into another notch. Set all four
adjusting levers to the same cutting
height position.
314 in.
(2.0 cm)
l-1/4 in.
(3.3 cm)
l-314 in.
(4.5 cm)
2-114 in.
(5.6 cm1
2-516 in.
(6.7 cm)
3 in.
(7.7 cm)
ADJUSTING LEVERS
ADJUSTWiG LEVER
Select the correct cutting height for your mowing requirements. Cutting height
settings of l-l /4 in (3.3 cm) to 2- l/4 in (5.6 cm) are appropriate for most lawns
during cool weather. A higher cut may be needed to protect the lawn during
hot summer months. Consult a local nursery or lawn & garden center for advice
about specific types of grasses and growing conditions in your area.
If you are not certain which cutting height to select, check the appearance
of the lawn after mowing a small area, then readjust cutting height if necessary.
17