Grass Bag Cleaning And Replacement - Honda HR215SXA Owner's Manual

9. MAINTENANCE
GRASS BAG CLEANING AND REPLACEMENT
When the bag needs cleaning, wash it
with a garden hose, and allow it to dry
completely before use; a wet grass bag
will clog quickly.
Replace a frayed, torn, or deteriorated
bag with a Honda replacement bag or
its equivalent.
SAG REMOVAL
1. Pull off one of the cap nuts, using
pliers. Or pry off, using two screw-
drivers, at opposite sides of the cap
nut flange.
NOTE:
l
To avoid marring the plastic lid
while prying off the cap nut,
place a thick rag, or other
material, under the screwdrivers.
l
These cap nuts are not reusable
Discard the cap nut after
removal. Obtain a new cap nut
for bag installation.
2. Remove the rod and the bag lid.
3. Unclip the plastic edges of the bag,
and remove the bag from the frame
RAG INSTALLATION
1. Insert the bag frame in the bag as
shown.
2. Clip the plastic edges of the bag
onto the frame as shown.
3. Insert the rod through the lid, frame,
and bag.
4. Secure the rod with a new cap nut.
Hit the cap nut with a hammer to
drive it onto the rod.