Table of Contents
Advertisement
The purpose of safety symbols
is to attract your attention
to possible dangers.
The safety symbols
and the explanations
with them deserve your careful
attention
and understanding.
The symbol warnings do not, by themselves,
eliminate any danger. The instructions
and warnings
they give are no substitutes
for proper accident
prevention
measures.
,_
WARNING:
Be sure to read and understand
all safety instructions
in this
manual, including
all safety alert symbols,
such as "DANGER,"
"WARNING,"
and "CAUTION,"
before using this Reciprocating
Saw. Failure to following
all
instructions
listed below may result in electric shock, fire and/or serious personal
injury,
SYMBOL
MEANNING
,_
SAFETY ALERT SYMBOL:
Indicates
DANGER, WARNING,
OR CAUTION.
May be used in conjunction
with other symbols or pictographs_
_k DANGER;
Failure to obey this safety warning will result in death or serious
injury to yourself or to others. Always follow the safety precautions
to reduce the
risk of fire, electric shock, and personal injury.
,_
WARNING:
Failure to obey this safety warning can result in death or serious
injury to yourself or to others. Always follow the safety precautions
to reduce the
risk of fire, electric shock, and personal
injury.
,_k CAUTION:
Failure to obey this safety warning may result in death
or serious injury to yourself or to others. Always follow the safety precautions
to
reduce the risk of fire, electric, shock and personal injury.
DAMAGE
PREVENTION
AND INFORMATION
MESSAGES
These inform user of important
information
and/or instructions
that could lead to
equipment
or other property damage if not followed.
Each message is preceded
by the word "NOTE"
as in the example below.
NOTE: Equipment
and/or property
damage
may result
if these instructions
are not followed.
WEAR
YOUR
27224 Manual
Revised 09-0608
The operation
of any power tool can result in foreign
objects being thrown into your eyes, which can result
in severe eye damage. Before beginning
power tool
operation,
always wear safety goggles or safety glasses
with side shields and a full-face shield when needed.
We recommend
a Wide Vision Safety Mask for use over
eyeglasses
or standard
safety glasses with side shields,
available at Sears Stores or other Craftsman
outlets.
Always use eye protection
that is marked to comply with
ANSI Z87ol
Page 3
Advertisement
Table of Contents
