Craftsman Professional 320.27224 Operator's Manual page 17

Fig. 11
A
B
,J
The saw can be used to cut metals, such as sheet steel, pipe, steel rods,
aluminum, brass, and copper. Be careful not to twist or bend the saw blade, Do
not force the saw.
The use of cutting oil is recommended when cutting soft metals and steel.
Cutting oil will keep the blade coot, increase cutting action, and prolong blade
life.
WARNING; Never use gasoline, because normal sparking could ignite the
fumes.
27224 Manuat Revised 09©608 Page 17